Français
NederlandsMean Well announcements 2018
The following new MeanWell items have been released on our webshop in 2018.
New in August 2018
DBR/DBU-3200 is a 3.2KW single output rack-type/enclosed type AC/DC smart charger in 1U low profile and high power density up to 37W/inch3.
New in February 2018
The DDR-15~60 series are equipped with DIN rail mounting brackets for fast and convenient installations. With outstanding features such as 4:1 wide input range, -40~+85°C operating temperature, 4000VDC IP-OP reinforced isolation.
New in March 2018
The DDR-120 has ultra-slim enclosure design with a width dimension of only 32mm. This enables convenient installation onto TS-35/7.5 or 15 standard DIN rails without having to worry about spacing.
New in July 2018
The DDR-240 series has ultra-slim enclosure design with a width dimension of only 40mm. This enables convenient installation onto TS-35/7.5 or 15 standard DIN rails without having to worry about spacing.
New in April 2018
DRP/DPU-3200 series are 3.2KW single output rack-type/enclosed type AC/DC power supply separately in 1U low profile with high power density up to 37W/inch3.
New in September 2018
ELGC-300 series can operate with wide AC input range from 100 to 305V. Furthermore, it adopts the Global Input /Output cable design, which can be applied worldwide.
New in January 2018
DLC-80 series adopts constant power mode design with input range: 180 ~ 295VAC and the output range: 1000 ~ 2100mA.
New in May 2018
This series also adopts constant power mode design with input range: 180 ~ 295VAC and the output range: 1300~3000mA.
New in August 2018
The GEM60I and GSM60E/U series are wall-mount type adapters, so they may be plugged directly into AC outlets, without pairing with an external AC cable.
New in October 2018
GSM12E/U series are wall-mount adaptors that come with AC plug options suitable for either EU (E Type) and USA (U Type) applications.
New in January 2018
Responding to DALI demands in the high bay market, MEAN WELL releases HBG-240-DA series（240W. By increasing DALI control interface models and complying with international regulations IEC62386-101, 102, and 207, LED luminaires system manufacturers have better planning flexibility and market demands are fully satisfied.
New in August 2018
HBGC-300 series can operate with wild AC input range(100 ~305 VAC) and adopts constant power mode design, reaching high efficiency up to 94.5%.
New in November 2018
In order to fulfill higher power application requirements, MEAN WELL is pleased to present the new 150W HDR-150 series. This series follows HDR family’s features and step shape plastic housing design.
New in May 2018
The primary feature for HRPG-1000 series is sharing the same mechanism with HRPG-600 series. Customers are able to replace 600W power supply with 1000W one without modifying system space.
New in May 2018
HVGC-650 series can operate with single phase input or one phase distributed from three phase input, which is a great advantage to industrial environment lighting or horticultural lighting application.
New in January 2018
MEAN WELL has launched multiple indoor LED drivers. Plastic housing type IDLV family and PCB Type IDPV family are constant voltage PWM output with PFC function. To offer more choices, MEAN WELL extends the output power down to 25 wattage.
New in September 2018
The IP TP media coupler KSR-01IP is a KNXnet/IP routing & tunneling device and works as KNX IP line/area coupler. No need to have an external power supply for powering.
New in November 2018
The KAA-8R Universal Actuator is suitable for different load situations and possible for many application areas up to 8 independent channels.
New in December 2018
The KAA-4R4V dimming actuator is a 4 channels device with high-quality independent latching relay to turn on or off, which is suitable for MEANWELL all kinds of LED drivers.
New in August 2018
KSI-01U is an interface for establishing a bidirectional connection between a PC and the KNX installation bus. The USB connector has a galvanic separation from the KNX bus.
New in September 2018
LCM-40/60EO series(40/60W) is a AC/DC constant current mode output LED driver featuring the multiple levels selectable by dip switch.
New in March 2018
DC-35/80 series are constant power mode output with the design of full load current setting by adding resistance and the NTC temperature compensation function.
New in May 2018
LDC-35DA/55DA/80 DA series adopts the linear design, which makes them suitable for slim lighting fixtures. Furthermore, LDC series is equipped with complete dimming function.
New in February 2018
The product adopts linear design, and the size is only: 320 * 30 * 21mm.Furthermore, meeting international safety regulations: UL8750, EN61347-1.61347-2-13, GB19510.1 certification guarantee users’ safety.
New in February 2018
MEAN WELL introduces display family product—LHP-200 series (200W) , which equips with slim and low profile as 26mm, built-in PFC function, current sharing function and output DC OK signal function.
New in June 2018
The major feature for MSP-1000 series is sharing the same mechanism with MSP-600 series. Customers are able to replace 600W power supply with 1000W one without modifying system space.
New in March 2018
The outstanding feature for PSPA-1000 is sharing the same mechanism with PSP-600. Customers can replace 600W power supply with 1000W one without modifying space.
New in April 2018
The RSDW/RDDW08 and RSDW/RDDW10 are designed according to the international DIP24 pin-out standard and are certified to the EN55032, EAC TP TC004, and EN50155 railway safety standards.
New in May 2018
The RSDW/RDDW20 series are designed according to universally accepted size and pin-out standards for 2”x1” converters, certified to the EN55032, EAC TP TC004, and EN50155 railway safety standards.
New in March 2018
The SCWN/DCWN06 series are designed according to the DIP24 dual in-line package standard and can be used as a direct replacement to the older SCW/DCW05 or any other products that share the same DIP24 footprint.
New in February 2018
The SCW20 offers the highest power density (41.6W/in3 ) out of all the DIP24 DC/DC converters currently available to the market. In addition, MEAN WELL is the only manufacturer with a 20W option in the DIP24 package.
New in August 2018
SPD-10-320S can dramatically decrease the high surge impact of lightning to luminaires, which expands luminaires life cycle.
New in February 2018
The key features for SPD-20HP are low Measured Limiting Voltage (MLV) and low Voltage Protection Level, UP.
New in October 2018
TDR-240’s key features include: 340~550VAC 3-phase input (2-phase input operational), fanless design cooled by free air convection, full load operation up to +60°C, 63mm narrow width, and a size that is 43% smaller than the previous generation DRT-240 series, which can solve spacing issues in limited space.
New in November 2018
It can be used for LED Bay light/Streetlight/Horticulture lighting and flood light applications. XLG series applies the constant current and constant power design, which remarkably enhances the convenience of integrating model selection.
