Français
NederlandsMean Well announcements 2019
The following new MeanWell items have been released on our webshop in 2019.
New in March 2019
CSP-3000’s most important feature is providing 120V/250V/400VDC high voltage output. Combined with constant current limit set at 100% output, this product series is very suitable for laser, UV curing, and charging equipment.
New in September 2019
DRDN20/40 and ERDN20/40 series are a series of 20A/40A power supply parallel redundancy modules, which can be used with the backup power supply to improve the stability and reliability of the overall system.
New in May 2019
The ELGC-300-DA series is a newly developed LED driver with DALI 2 dimming function which can be applied with intelligent dimming control interface and further increase the value of the luminaires.
New in April 2019
MEAN WELL has achieved 120W in a 3”x2” PCB form factor via technical breakthrough and is proud to release the ultra-high power density miniaturized EPP-120S series.
New in March 2019
As a response to the increasing demands for higher power density in open frame power supply applications, MEAN WELL is expanding the 5”x3” open frame product offering to reach 500W output power. EPP-500 series’ 500W output is currently the highest available wattage for a 5”x3” open frame type power supply.
New in February 2019
FDHC-100 series is specially designed with AC input over voltage cut-off function for areas with unstable electricity supply. With such a function, the reliability of LED driver becomes higher and can even extend the lifetime of luminaires.
New in August 2019
After GE12/18/24/30 series were launched, MEAN WELL is proud to unveil the 40W wall-mount type green adaptor with interchangeable AC plugs ~GE40 series.
New in November 2019
Soon after the GEM12I/18I/30I/40I/60I (12W/18W/30W/40W/60W )series are released, MEAN WELL is pleased to unveil the new 6W GEM06I series in order to meet the lower out wattage application demands.
New in July 2019
The HBGC-300 series is a newly developed LED driver for Bay light and outdoor floodlight luminaires applications with DALI 2 dimming function which can operate with intelligently dimming control to increase the luminaire’s value and functions.
New in October 2019
The HEP-1000 is enclosed in a unique fanless and fully sealed metal casing and is fully encapsulated with silicone gel, which provides effective environmental protections when installing power supplies in dusty and humid environments.
New in August 2019
The HVGC-1000 series can operate with single phase 230V AC input or one phase 347V/380V AC distributed from three phase input, a vantage to horticultural lighting and stadium lighting applications.
New in April 2019
The ICL-16 utilizes built-in thermal fuse and bypass relays in the inrush current suppression circuit design, which significantly reduces the heat generated during operation and improves the product reliability, thus differentiating the ICL-16 from other inrush current limiters that use NTC.
New in October 2019
As a response to high demands from the market for higher current inrush current limiters, MEAN WELL quickly releases the ICL-28R/L series that can support higher current ratings than the ICL-16R/L.
New in February 2019
The KNX Power Supply KNX-40E-1280 is a 1280 mA power supply with high efficiency and a small footprint of only 4SU (72 mm). The device has a KNX bus choke output and additional output for auxiliary power.
New in May 2019
The KNX Power Supply KNX-40E-1280D is a 1280 mA power supply with high efficiency and a small footprint of only 4SU (72 mm). The device has a KNX bus choke output and additional output for auxiliary power.
New in April 2019
The KSC-01L model has built-in automatic telegram filtering function, to ease commissioning and troubleshooting the manual function for short-time telegram filter switch-off and special routing/repetition/confirmation/settings are available.
New in December 2019
LCM-25KN series is a 25W AC/DC constant current mode output LED driver featuring the multiple levels selectable by dip switch and the KNX interface to avoid using the complicated KNX-DALI gateway.
New in September 2019
Working in cooperation with the European company Casambi, which is dedicated to developing Bluetooth mesh networking solutions, MEAN WELL has integrated the Bluetooth mesh module with our LCM-40/60BLE series.
New in April 2019
In order to enlarge KNX product variety to meet the needs of end customers and system integrator. After the launch of KAA-4R4V 4 channel dimming actuator, the world first in the market KNX LED constant current driver is proudly introduced.
New in January 2019
NID35/65/100 are pin to pin compatible with NID30/60 which features seamless upgrade. The main features are: 10.5~53Vdc wide range input voltage to cover 24V/48V DC Bus voltage commonly used in systems, operating temperature -30 to +85 °C with convection cooling.
New in September 2019
PHP-3500 is a 3.5kW single output enclosed type AC/DC water-cooling power supply which adopts fully digitalized design and possesses rich features such as 96% high efficiency, programmable output, support communication, multiply output power in parallel connection, in 60mm low profile and 18W/inch3 power density.
New in March 2019
MEAN WELL decided to add DALI function to the current PWM style output style LED Driver series— PWM-120 series, which led to a wide and huge positive feedback from the market. To further satisfy customers’ demands, the DALI function was added to the current PWM-60/90 series, through which, we believe broader applications can be covered.
New in April 2019
MEAN WELL is expanding the RPS family’s 3”x2” product offering to 120W, up from 30~65W of the previously released RPS-30/45/65, by releasing the ultra-high power density RPS-120S series.
New in April 2019
RPS-500 series comes with options for multiple form factors, including bare PCB (RPS-500), fanless covered (RPS-500-C), as well as chassis mount with built-in fans (top fan: RPS-500-TF; side fan: RPS-500-SF). With the various optional offerings, MEAN WELL is able to provide new standard power solutions for many different medical applications.
New in February 2019
Those two series are mainly designed for the functions to isolate interference and convert voltage for the power system installed on-board the PCB.
New in August 2019
The launch of SLD series is believed to meet the requirements for wider and different lighting applications. Its’ slim and linear appearance is suitable for decoration lighting/signage and linear luminaire application.
New in September 2019
MEAN WELL new ultra-slim SLD-50 series is officially released soon after the SLD-80 series. With the launch of SLD-50 series, the whole linear type product line is fully completed.
New in July 2019
In order to continuously enhance the completeness of MEAN WELL DC/DC converter product line, MEAN WELL releases the 1W 2:1 input regulated converter SMT01 series, shortly after the release of the low-cost regulated SBTN/SFTN01 series.
New in February 2019
With a view to the needs of higher wattage and small size, MEAN WELL recently launched a new 9W single-output SPB09 and dual-output DPB09 series.
New in August 2019
As a response to the positive feedback for previously released SPD-10-320S, SPD-20HP-277S/480S, and SPD-20 surge protectors, MEAN WELL is releasing the new SPD-10S-277S that has small size, low cost, safety approvals, and can sustain a maximum discharge current of 10kA.
New in June 2019
In comparison to the old generation SPR01, these new products have wider operating temperature range (-40～+90℃), higher I/O isolation level (1.5KVDC), and higher conversion efficiency (up to 73%).
New in August 2019
In our effort to continually improve the DC/DC converter product competitiveness, MEAN WELL is releasing the next generation SPUN02 to replace the SPU02 that has been on the market for 12 years.
New in Feburary 2019
MEAN WELL expands to higher power coverage by releasing the UHP-750 (750W) and UHP-1000 (1000W) series. Undoubtedly, the UHP-750 series and UHP-1000 series will be the top choice for high-power power supplies that are suitable for applications in a wide variety of environment.
New in August 2019
UHP-1500 is the first conduction-cooled series equipped with communication function that built-in PMBus or CANBus is available for customer to choose from. The communication protocols allow the power supply to be seamlessly integrated into high-end systems such as data center, network equipment, and charging system.
New in August 2019
The product is equipped with programmable voltage and current (PV/PC) functions, which allows the trimming of output voltage between 50~120% and current between 20~100% by an external DC control signal, and communication protocols PMBus or CANBus available for customer to choose from.
New in December 2019
MEAN WELL leading conduction-cooled power supply UHP-2500 struck a chord when 24V and 48V models were released in August 2019. In order to meet the comprehensive needs of end customers, MEAN WELL is pleased to launch the UHP-2500-36 model to complete the UHP series.
New in April 2019
MEAN WELL is proud to introduce the AC-DC 400W low-profile modular fan-less power supply, UMP-400 series. This product is a 1U low profile power supply which can also be modularized. The concept of being flexible and modular makes it an uncommon type of power supply on the market.
New in October 2019
WDR-60 series can accept 180~550Vac ultra-wide input, and they are suitable for installation on a single-phase 230Vac power line or single-phase out of a 3-phase 330~550Vac power system, thus greatly increasing the system application flexibility.
New in April 2019
In response to the miniaturization trend of the lighting fixture design, MEAN WELL R&D team expertly designed the XLG series, successfully reducing by 20~30% of the dimension.
New in May 2019
To offer a complete product choice, the XLG-150/200 series (150/ 200W) is soon officially unveiled after the launch of XLG-25/50/75 /100 series (25/50/75 /10W). The whole series adopts constant power mode design, which is convenient for customers to design and adjust driver current for various LED light sources.
New in March 2019
XBG-160 series can be used at 100% load output with driver current from 2850 m A ~4100 m A at 160w full power output. This series is a suitable fit for industrial application.
New in July 2019
MEAN WELL XLG-240 series officially debuts today. Combining the experienced of engineers, the rigorous testing of DVT / DQT of the internal quality assurance department, and obtaining international product safety regulations, the XLG family (25~240W) products are launched.
