Mean Well Product Notices
Updates about Mean Well products
CSP-3000 is MEAN WELL first high-voltage power supply, providing 120V / 250V / 400V output voltage. Since it was launched, it has been highly favored and being widely used in laser, UV curing and charging applications. In order to make the product fit to the market application better, several upgrades from customers’ feedbacks are made, listed as follow：
Product Upgrade Notice: MEAN WELL GST Family Acquires 62368-1 Safety Approval and ErP Efficiency Compliance
Global Pioneer in Standard Power Supplies Industry, MEAN WELL, has always proud of our five core values as Brand, Distributor, Computerized, Approvals, and Innovation. MEAN WELL always held Approvals in high regard and continuously updates our products’ safety approvals in order to fulfill global market demands.
Product Change Notice: Protection Method of LRS-200-48 & LRS-350-48 is changed to re-power on to recover mode
The all-purpose industrial standard power supply, LRS family, has completed the EN62368 safety upgrade in October 2019. To fulfill the latest safety regulation, tthe circuit design of LRS-200-48 and LRS-350-48 was changed, adjusting the protection methods such as Over Load Protection (OLP), Over Voltage Protection (OVP), and Over Temperature Protection (OTP) to“ shut down and latch off o/p voltage, re-power on to recover.” Other LRS-200/350 3.3~36V models remain the Hiccup mode protection. (Show as fig.1) This change only shows the difference during error state, while under normal working circumstances; all LRS series can maintain high quality and stable output as usual. Shall you have any questions regarding this engineering change, please contact MEAN WELL sales representative.
Product Upgrade Notice: IRM-30/45/60, EPS-45S/65S, EPP-120S/400/500 Officially Obtained EN60335-1 Approval
In order to fulfill the increasing demands of end systems that require the power supplies’ compliance with the EU household electrical appliance requirements, MEAN WELL has dedicated resources for the upgrade of selected PCB type power supplies with TUV EN60335-1 (Household and similar electrical appliances) safety approval. The IRM-30/45/60, EPS-45S/65S, and EPP-120S/400/500 have completed the safety certification process, and customers that design these power supplies into their products can significantly reduce the system level safety fees, by bypassing various burdensome certification procedures, and the end system can quickly and easily obtain the safety approval.
The industrial use enclosed type standard power supply LRS is a super product launched by MEAN WELL after many years of expertise in serving the industrial power sector. Since its debut in 2015, the LRS family soon revolutionized the standard power supply industry due to its multitudes of outstanding features, such as ultra-high cost performance ratio, low profile design, 91.5% high efficiency, and low no load power consumption (small than 0.2W~0.75W by model), etc. Furthermore, the LRS reached annual sales quantity of 10 million units, making it an all-purpose product suitable for all types of applications.
Product Upgrade Notice: UHP-1000/1500/2500 & PHP-3500 Upgraded with Over Temperature Automatic De-rating Function
The conduction-cooled UHP family is MEAN WELL new generation of industrial control power supply, and its unique fanless design has been well received by the market since release. UHP family 1000W and above products (UHP-1000/1500/2500 & PHP-3500) come with the Programmable Current (PC) function, which allows the output current to be modulated between 20%~100% by applying an external 1~5VDC control signal. One common application for the PC function is charging application. Customers can use the PC function to control charge rate of batteries. During the charging operation, if the temperature is too high, traditional over temperature protection will shut-off the output power completely until temperature cools down. The upgraded UHP-1000/1500/2500 & PHP-3500 will have automatic output power de-rating when operated with the PC function, which will effectively improve product reliability and still charge the batteries at a slower rate to maintain equipment operation.
After deeply cultivating the Din Rail power supply market, MEAN WELL has managed to a foothold with millions of sales being made every year. Recently, we received some customers feedback on the plastic mounting clip. When being applied on the constantly vibrating devices (ex: railway transportation), the plastic mounting clip of Din Rail products may have long-term reliability doubt. The upgrade this time is to replace the plastic mounting clip material of 75~480W products with stainless steel components. Also, the die-casting material of SDR-960, TDR-960 series (960W) are replaced with stainless steel. For upgrade details and date, please refer to table 1.
To satisfy the 277VAC power system in North America, the usage in countries with unstable AC supply, end equipment with over voltage OVCⅢrequirement, and BSMI safety certificate in Taiwan, MEAN WELL optimizes the over-million-sales product, IRM series 5~60W standard product by upgrading the specification and acquiring for BSMI safety certificate.
Since the launch of the G3 family (RS, RD, RID, RT, and RQ series), it has been the first choice for multi-output models due to its high CP values. There was a minimum load limit for the multiple sets of output models, which is a common specification. However, to fulfill more application demands, the optimization this time brings more opportunities to the G3 Series.
The 2019.7 version of “Discontinued Products” and “End of Life” are updated on the website. Please refer to the following link for more details. As MEAN WELL constantly announces new products with higher cost performance every year, the precedent generation products will be replaced gradually. A progressive method will be practiced to phase out the old models; simultaneously, we sincerely hope to share our thrilling research and development results with you.
As the SMD Type DC-DC converter SBT01/SFT01/DET01 series were launched 14 years ago, to purchase the manufacture materials became relatively difficult. From 1st, July 2019, the lead time of the SBT01/SFT01/DET01 series was prolonged to 90 days instead of 35 days and will be EOL in Sept. 30, 2019.
KNX standard is based upon three European bus protocols predecessors, EIB, EHS and BatiBUS, providing a complete solution for all applications in home and building control. With own strength in LED drivers and the delving in KNX technology, MEAN WELL officially launched the world first constant current LED driver with KNX interface, LCM-40/60 KN series (40W/60W) ) in early April.
MEAN WELL, the leading standard power supply manufacturer, continues to promote the building automation technology for making green and sustainable society. After the launch of KNX power supply KNX-20E-640, MEAN WELL continues to release KNX products such as universal switching actuator (KAA-8R), dimming actuator (KAA-4R4V), and KNX bus power supply (KNX-40E) and so on.
As MEAN WELL keeps listening to customers’voice, we constantly optimize and improve our products in specifications and application aspects, making them more convenient for customers to utilize. This time, the LED driver series: FDL-65, FDLC-80/100, FDHC-100 series, the length of the input and output cables are extended from the original 15 cm to 30 cm, which greatly enables customers to assemble and install easily and conveniently.
The global leading LED driver brand, MEAN WELL officially announces the pre-order notice of XLG family. Launched in December 2018, XLG family is the new generation of the excellent-cost-performance metal case LED driver. Due to its constant power design and excellent cost performance features, the latest release XLG-25/50 series have already received wide and high recognition from customers. Not to mention the fact that the number of orders continue to boom. XLG family (75 W -240W) will also be listed in the near future and provide a more complete full range of product lines.