Other Mean Well products
The following new MeanWell items have been released on our webshop.
New in October 2019
As a response to high demands from the market for higher current inrush current limiters, MEAN WELL quickly releases the ICL-28R/L series that can support higher current ratings than the ICL-16R/L.
New in August 2019
As a response to the positive feedback for previously released SPD-10-320S, SPD-20HP-277S/480S, and SPD-20 surge protectors, MEAN WELL is releasing the new SPD-10S-277S that has small size, low cost, safety approvals, and can sustain a maximum discharge current of 10kA.
Nieuw in mei 2019
De KNX-voeding KNX-40E-1280D is een 1280 mA-voeding met een hoog rendement en een kleine footprint van slechts 4SU (72 mm). De voeding heeft een KNX bus choke-output en een extra output voor hulpvoeding. Dankzij het brede temperatuurbereik van -30°C tot en met +70°C is de voeding geschikt voor diverse applicaties.
New in April 2019
The KSC-01L model has built-in automatic telegram filtering function, to ease commissioning and troubleshooting the manual function for short-time telegram filter switch-off and special routing/repetition/confirmation/settings are available.
New in April 2019
The ICL-16 utilizes built-in thermal fuse and bypass relays in the inrush current suppression circuit design, which significantly reduces the heat generated during operation and improves the product reliability, thus differentiating the ICL-16 from other inrush current limiters that use NTC.
New in February 2019
The KNX Power Supply KNX-40E-1280 is a 1280 mA power supply with high efficiency and a small footprint of only 4SU (72 mm). The device has a KNX bus choke output and additional output for auxiliary power.
New in December 2018
The KAA-4R4V dimming actuator is a 4 channels device with high-quality independent latching relay to turn on or off, which is suitable for MEANWELL all kinds of LED drivers.
New in November 2018
The KAA-8R Universal Actuator is suitable for different load situations and possible for many application areas up to 8 independent channels.
New in September 2018
The IP TP media coupler KSR-01IP is a KNXnet/IP routing & tunneling device and works as KNX IP line/area coupler. No need to have an external power supply for powering.
New in August 2018
KSI-01U is an interface for establishing a bidirectional connection between a PC and the KNX installation bus. The USB connector has a galvanic separation from the KNX bus.